Carrier Access CMG Router Manuel d'utilisateur télécharger pdf (Page 31)

Adit 600 - Release 10.1.1 29

Quick Start

Configuration

E1 Setup

NOTE: E1 is not supported in this release of the Adit 600 Controller. It will be

supported in a future release.

Use the following commands to set up an E1. See the set (e1) command for more

details.

DS0/Channel Setup

Use the following commands to set up a DS0. See the set (ds0) command for details.

Command Description

set {e1-addr} up Activate the port of the E1 (slot:port)

set {e1-addr} id {"id-string"} Set the identification string

set {e1-addr} lbo {1 - 9} Set the line buildout value for the E1

set {e1-addr} linecode

{ami|hdb3}

Set the linecode for the E1

set {e1-addr} framing

{e1fr|lefrcrc}

Set the framing option for the E1

set {e1-addr} loopdetect

{on|off}

Set the detection/reaction to CSU loopcodes

Command Description

set {slot:port:channel} up Activate the channel.

set {slot:port:channel} signal

{ls|gs|emw|emdw|emicpd|dpt}

Set the signaling option for the channel.

set {slot:port:channel} type

{data|voice}

Set the channel type.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 53 54

Pas de commentaire

Carrier Access CMG Router Manuel d'utilisateur Page 31