Carrier Access Network Device Adit 3104 Manuel d'utilisateur télécharger pdf (Page 37)

Adit 3104 - Release 1.6 3-7

Electrical Installation & Cabling

Interface Connectors

DS1/E1 Connection Ports

Each DS1/E1 connection port is equipped with a standard RJ-48C (female) on the

Adit 3000 unit. Note: E1 will be available in a future release.

The pinouts are as follows:

DS1/E1 RJ-48C

The pinouts are as follows:

The LEDs are as follows (left LED only):

Pin Name Description

1 Receive Ring Receive from DS1 network

2 Receive Tip Receive from DS1 network

3 N/C Not connected

4 Transmit Ring To DS1 network

5 Transmit Tip To DS1 network

6-8 N/C Not connected

State Description

Off Off line

Green Normal

Red Loss of Signal (LOS)

Yellow Bipolar Violation (BPV)

Flashing Green Loopback active

Flashing Yellow Yellow Alarm (Remote Alarm Indication)

Flashing Red (Slow) Loss of Frame (LOF) or Alarm Indication Signal (AIS)

Flashing Red (Fast) Self-test Failure

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 73 74

Pas de commentaire

Carrier Access Network Device Adit 3104 Manuel d'utilisateur Page 37