Carrier-access Network Device Axxius 800 Manuel d'utilisateur télécharger pdf (Page 220)

100

101

5-120 Axxius 800 - Release 2.2

CLI Commands

set

set (router) port passive

Use the set (router) port passive command to set the TSR port to passive. This command

will terminate any active telnet connection on this interface and will reinitialize its

associated TCP socket.

Syntax: set {tsr_card-addr} port {port-number} passive

Example: set 1 port 2 passive

Do you wish to do this (y/n)?

{tsr_card-addr}

The slot number (1-8) that contains the TSR card.

{port-number}

The port number (1-4) of the TSR card.

set (router) port password

Use the set (router) port password command to set the password on a TSR port.

Syntax: set {tsr_card-addr} port {port-number} password

{"password"}

Example: set 1 port 2 password "test"

This command will set the password for port 2 on the TSR card in slot 1 to "test".

{tsr_card-addr}

The slot number (1-8) that contains the TSR card.

{port-number}

The port number (1-4) of the TSR card.

{"password"}

A password with a maximum of 15 characters, enclosed in quotes.

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 567 568

Commentaires sur ces manuels

Pas de commentaire

Carrier-access Network Device Axxius 800 Manuel d'utilisateur Page 220

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Carrier-access Network Device Axxius 800