Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur télécharger pdf (Page 206)

100

101

6-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - T1 Controller Mode

linecode

Use the Controller T1 linecode command to set the line coding for the designated T1.

Syntax: (config-cont-t1-{n})# linecode {ami|b8zs}

Example: (config-cont-t1-1)# linecode ami

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500

loopback

Use the Controller T1 loopback command enables a loopback on the T1.

Syntax: (config-cont-t1-{n})# loopback {line|none|payload}

Example: (config-cont-t1-1)# loopback line

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500

Field Definition

ami Alternate Mark Inversion line coding (AMI).

b8zs Binary 8 Zero Substitution line coding (B8ZS). Default.

Field Definition

line Line loopback enabled.

none Loopback disabled. Default.

payload Payload loopback enabled.

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 495 496

Commentaires sur ces manuels

Pas de commentaire

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur Page 206

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca