Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur télécharger pdf (Page 372)

100

101

16-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - OSPF Mode

network area

Use the Router OSPF network area command to define the interfaces on which OSPF will run and set

the ID for those interfaces. To disable OSPF routing for the interface defined, see no network area

command on page 16-8.

Syntax: (config-ospf)# network address wildcard-mask area area-id

Example: (config-ospf)# network 192.168.1.1 0.0.0.255 area 1

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

address IP address

wildcard-mask IP address-type mask that includes "don’t care" bits.

area-id Identifier of the stub area, in the form:

ID number - Range 0-4294967295

IP address - IP address of the area.

If you intend to associate areas with IP subnets, specify a subnet

address as the value of the area-id.

1 2 ... 367 368 369 370 371 372 373 374 375 376 377 ... 495 496

Commentaires sur ces manuels

Pas de commentaire

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur Page 372

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca