Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur télécharger pdf (Page 215)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 7-5

Configuration - DHCP Pool Ethernet Mode

no commands

no option

Use the DHCP Pool no option command to delete a DHCP option. To add a DHCP pool, see

option command on page 7-6.

Syntax: (config-dhcp-eth-{n})# no option {66|67}

Example: (config-dhcp-eth-1)# no option 66

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

no relay

Use the DHCP Pool no relay command to disable DHCP relay. To enable relay, see

relay command on page 7-6.

Syntax: (config-dhcp-eth-{n})# no relay

Example: (config-dhcp-eth-1)# no relay

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

no static-lease

Use the DHCP Pool no static-lease command to remove a static DHCP lease. To add a static lease,

see static-lease command on page 7-7.

Syntax: (config-dhcp-eth-{n})# no static-lease ip-address address

Example: (config-dhcp-eth-1)# no static-lease ip-address 10.10.2.100

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

66 Remove/Disable option 66 (TFTP server name).

67 Remove/Disable option 67 (Boot file name).

Field Definition

address Enter the IP address of the static lease to remove.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 495 496

Commentaires sur ces manuels

Pas de commentaire

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur Page 215

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca