Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur télécharger pdf (Page 355)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-13

Configuration - L2TPC Mode

metric

Use the L2TPC metric command to configure the Metric of the IP network on this interface.

Syntax: (config-l2tpc-{n})# metric metric

Example: (config-l2tpc-1)# metric 150

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

no commands

no firewall

Use the L2TPC no firewall command to disable the configured firewall. To enable the firewall, see

firewall command on page 15-3.

Syntax: (config-l2tpc-{n})# no firewall

Example: (config-l2tpc-1)# no firewall

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

no ip address

Use the L2TPC no ip address command to remove the IP address assigned to the port. To set the

Serial IP address, see ip address command on page 15-5.

Syntax: (config-l2tpc-{n})# no ip address address

Example: (config-l2tpc-1)# no ip address 192.168.1.100

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

metric Range is 0-255, with a default is 10.

Field Definition

address Enter the IP address to remove.

1 2 ... 350 351 352 353 354 355 356 357 358 359 360 ... 495 496

Commentaires sur ces manuels

Pas de commentaire

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur Page 355

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca