Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur télécharger pdf (Page 310)

100

101

13-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - Serial Interface Mode

multilink-group

Use the Serial Interface multilink-group command to configure a MLPPP group.

Syntax: (config-int-ser-{n})# multilink-group group-number

Example: (config-int-ser-1)# multilink-group 1

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

no commands

no encapsulation ppp

Use the Serial Interface no encapsulation ppp command to disable PPP encapsulation. To enable

encapsulation, see encapsulation ppp command on page 13-4.

Syntax: (config-int-ser-{n})# no encapsulation ppp

Example: (config-int-ser-1)# no encapsulation ppp

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

no firewall

Use the Serial Interface no firewall command to disable the configured firewall. To enable the

firewall, see firewall command on page 13-5.

Syntax: (config-int-ser-{n})# no firewall

Example: (config-int-ser-1)# no firewall

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

group-number Enter multilink group.

Adit 3104, Adit 3200, Adit 3500: Value must be 1.

MSR: Range = 1-8.

1 2 ... 305 306 307 308 309 310 311 312 313 314 315 ... 495 496

Commentaires sur ces manuels

Pas de commentaire

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuel d'utilisateur Page 310

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca